Page 14 - MM-Traders-Xylem-Catalogue

®
mm traders

G55 FLOJET PUMP

Pump Design: Positive Displacement, Double Diaphragm
Power Source: C02 Gas, Nitrogen or Compressed Dry Filtered Air
Materials of Construction
(wetted parts): Polypropylene, Santoprene®, EPDM, AISI 303 or
304 Stainless Steel
Temperature Limits: 34° - 120° F (1.1° - 49° C)
Weight: 1.24 lbs. (0.56 kg.)
Dimensions: 5.27" H x 3.21" W x 4.58" D (133.8 mm x 81.5 mm x
116.3 mm)
Displacement: 3.2 oz. per cycle
Self Priming: Up to 10 ft. (3.05 m)
Operating Pressure: 20 psi (1.4 bar) min./90 psi (6.2 bar) max.
Liquid Inlet Pressure: 30 psi (2.1 bar) max.
Flow Rate: 7.0 oz. (207.0 ml)/sec.- Open Flow
Noise Level: Maximum 80 dB
G55
Approvals: NSF listed, SK & CE

G56 FLOJET PUMP

Pump Design: Positive Displacement. Double Diaphragm
Power Source: CO2 Gas, Nitrogen or Compressed Filtered Air
Materials of Construction
(wetted parts): Polypropylene Santoprenee, EPDM,
AISI 304 Stainless Steel
Temperature Limits: 30° - 120° F (1 .1°- 49° C)
Weight: 1.24 Ibs. (0.56 kg.)
Dimensions: 5.27" H x 3.21" W x 4.58"
D (133.8 mm x 81.5 mm x 116.3 mm)
Displacement: 3.2 oz. per cycle
Self Priming: Up to 10ft. (3.05 m)
Operating Pressure: 10 psi (0.7 bar) min./90 psi (6.2 bar) max.
Liquid Inlet Pressure: 30 psi (2.1 bar) max.
Flow Rate: 5 GPM (18.9 LPM) - Open Flow
Noise Level: Maximum 80 dB
G56 Approvals: NSF listed, SK & CE

G57 FLOJET PUMP

Pump Design: Duplex Diaphragm
Wetted Parts: Diaphragm Material Santoprene ® or Viton ®
Check Valve Seat Material Santoprene ® or Viton ®
Housing and check valve material
Polypropylene (Glass Reinforced)
Springs: Hastelloy
Ports: Gas Inlet & Outlet 1/4” (6.3 mm)
Product Inlet - 3/8” (9.5 mm)
1/2” (12.7 mm)
3/4” (19.1 mm)
Product Outlet - 3/8” (9.5 mm)
1/2” (12.7 mm)
3/4” (19.1 mm)
Net Weight: 1.2 Pounds (0.54kg)
Liquid Temperature Min: 40°F (4.4°C) Max 120°F (48.9°c)
Priming Dry: 15 ft. (4.5 m) Wet 20 ft. (6.1 m)
G57
Flow Rates Max: Up to 5 GPM (18.9 L/min)
Gas Supply Pressure: 20 to 100 PSI (1.4 to 6.9 bar)
Noise Level Max : 87dB 14